Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors

Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors

Numéro d'article: PO2266
Code barre – EAN: 4060137018206
catégorie: Schrittmotoren
Fabricants: Pololu
#global.chan#: 2266
#global.warengruppe#: Tier3

This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket.

5,89 €

inclus 19% TVA , plus (L)

Stock limité
Temps de livraison: 1 - 3 Jours ouvrés #productDetails.shippingInfoIcon#

Description

This bracket makes it easy to mount and integrate NEMA 17 size motors like our stepper motor with lead screw into your project. These brackets also fit the 42×18.6mm Sanyo pancake motor and the 42×11.6mm Sanyo pancake motor, though the two Sanyo motors have short output shafts that will only extend two millimeters past the edge of the bracket.

the motor mounts to the bracket allow for 2 mm of play for fine-tuning position, and four 6 mm M3 screws are included for securing the motor to the bracket (note: these M3 screws work with all of the NEMA 17 stepper motors we carry; different screws might be required when using this bracket with stepper motors from other suppliers). The other side of the bracket includes a variety of slots and holes that can be used with #6, #8 and M4 screws.